Section 75 (1.6L SOHC Engine): Pump-Oil: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Timing Chain Cover Seals & Oil Pump

Courtesy of DAIMLERCHRYSLER CORP.

1 - TIMING CHAIN COVER SEALS

2 - OIL PUMP

3 - PRESSURE RELIEF VALVE

Install oil pump assembly (2). Start bolts by hand.

Fig 2: OIL PUMP ASSEMBLY TORQUE SEQUENCE
Courtesy of DAIMLERCHRYSLER CORP.
Torque bolts to 13 N.m (118 in. lbs.) in the sequence above. See Fig 2.

Fig 3: Timing Chain Cover
Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT CRANKSHAFT OIL SEAL

2 - TIMING CHAIN COVER
Install timing chain cover (2) (Refer to ENGINE/VALVE TIMING/TIMING CHAIN COVER - INSTALLATION) .