Installation - Left Axle Seal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Differential and Seal Removal/Installation

Courtesy of DAIMLERCHRYSLER CORP.

Using Tool L-4507, install left (inboard) axle seal (2).
Install differential (3). Install cover (5) with new o-ring seal (4).
Install and torque cover-to-housing bolts to:
- M10x40 - 65 N.m (48 ft. lbs.)
- M8x25 - 34 N.m (25 ft. lbs.)
Fig 2: Fluid Fill Plug Location
Courtesy of DAIMLERCHRYSLER CORP.
Install axle assembly into vehicle. (Refer to DIFFERENTIAL & DRIVELINE/FRONT AXLE - INSTALLATION)
Fill axle with 600ml (0.64 qts.) Mopar® 75W-90 Synthetic Gear Lubricant. Torque fill plug (1) to 30 N.m (22 ft. lbs.)