LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Differential & Driveline) >> Front Axle - 175 FIA >> Removal

Front Axle - 175 FIA: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
  2. Remove both front halfshafts. (Refer to DIFFERENTIAL & DRIVELINE/HALF SHAFT - REMOVAL) 
  3. Remove front intermediate shaft assembly. (Refer to DIFFERENTIAL & DRIVELINE/INTERMEDIATE SHAFT - REMOVAL) 
  4. Remove front propeller shaft. (Refer to DIFFERENTIAL & DRIVELINE/PROPELLER SHAFT - REMOVAL) 
  5. Remove RH catalytic converter/exhaust pipe assembly. (Refer to EXHAUST SYSTEM/CATALYTIC CONVERTER - REMOVAL)
    Fig 1: Return Hose Routing Clips
    GC0013317Courtesy of DAIMLERCHRYSLER CORP.
  6. Separate power steering return line (3) from cradle by unfastening clips (1).
    Fig 2: Front Drive Axle Housing
    GC0014191Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove front axle housing support bracket (1).
    Fig 3: Front Axle Removal/Installation
    GC0014190Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove seven front axle assembly-to-oil pan bolts. Remove axle assembly (1) from vehicle.
scientia non olet · About LEMON Manuals