Section 7 (Differential & Driveline): Shaft-Intermediate: Removal
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The intermediate shaft is serviced only as a complete assembly.
- Remove left halfshaft assembly (2). (Refer to DIFFERENTIAL & DRIVELINE/HALF SHAFT - REMOVAL)
- Remove four intermediate shaft-to-oil pan bolts(1). Remove assembly (3) from engine