LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Overhead Console (Service Information)) >> Sensor-Ambient Air Temperature >> Removal

Sensor-Ambient Air Temperature: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the belly pan, (Refer to BODY/EXTERIOR/BELLY PAN - REMOVAL) .
    Fig 1: Ambient Temperature Sensor Connector
    GC0016233Courtesy of DAIMLERCHRYSLER CORP.
  3. Disconnect the wire harness connector (1) from the ambient temperature sensor (2).
    Fig 2: Ambient Temperature Sensor Fastener
    GC0016234Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the fastener that secures the ambient temperature sensor bracket to the front fascia.
  5. Remove the ambient temperature sensor from the vehicle.
scientia non olet · About LEMON Manuals