LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Instrument Cluster (Service Information)) >> Cluster Lens >> Installation

Cluster Lens: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Cluster & Lens
GC0016046Courtesy of DAIMLERCHRYSLER CORP.
  1. Place cluster lens into position on cluster.
  2. Install the cluster lens screws.
  3. Install the cluster bezel (Refer to BODY/INSTRUMENT PANEL/CLUSTER BEZEL - INSTALLATION) .
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals