LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 ((Electronic Shift Module (ESM) - Electrical Diagnostics)) >> DTC Troubleshooting >> P0607-Ecu Internal Performance - ESM (Column Shift) >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. ELECTRONIC SHIFT MODULE 

    View repair

    Repair 

    • Using the schematics as a guide, check the Electronic Shift Module (ESM) terminals for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the ESM (Steering Column) per the Service Information.
    • Perform NAG1 TRANSMISSION VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure
scientia non olet · About LEMON Manuals