LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Restraints System (Service Information)) >> Seat Belt And Retractor >> Removal >> Rear Center - Wagon

Rear Center - Wagon

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Back Trim Cover
GC0016667Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the left seat back trim cover (60% portion of the rear folding seats) (Refer to BODY/SEATS/SEAT BACK CUSHION/COVER - REMOVAL) .
  2. Disconnect the rear seat back latching cable from seat frame.
    NOTE: If the seat back is not fully latched, the center seat belt will not release from the retractor.
  3. Remove the one bolt (2) holding the rear center seat belt retractor.
scientia non olet · About LEMON Manuals