LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Lighting Systems - Exterior (Service Information)) >> Switch-Headlamp >> Installation

Section 31 (Lighting Systems - Exterior (Service Information)): Switch-Headlamp: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Switch Electrical Connector
GC0016116Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the headlamp switch electrical connector.
  2. Position headlamp switch in instrument panel and firmly snap into place.
  3. Install the steering column opening cover (Refer to BODY/INSTRUMENT PANEL/STEERING COLUMN OPENING COVER - INSTALLATION) .
scientia non olet · About LEMON Manuals