Diagnosis And Testing: Introduction
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Engine diagnosis is helpful in determining the causes of malfunctions not detected and remedied by routine maintenance.
These malfunctions may be classified as either mechanical (e.g, a strange noise), or performance (e.g, engine idles rough and stalls).
Refer to MECHANICAL or ENGINE DIAGNOSIS - PERFORMANCE . Refer to FUEL SYSTEM for the fuel system diagnosis.
Additional tests and diagnostic procedures may be necessary for specific engine malfunctions that cannot be isolated with the Service Diagnosis charts. Information concerning additional tests and diagnosis is provided within the following:
- Cylinder Compression Pressure Test: Refer to CYLINDER COMPRESSION PRESSURE .
- Cylinder Combustion Pressure Leakage Test: Refer to CYLINDER COMBUSTION PRESSURE LEAKAGE .
- Cylinder Head Gasket Failure Diagnosis: Refer to CYLINDER HEAD GASKET .
- Intake Manifold Leakage Diagnosis: Refer to MANIFOLD-INTAKE LEAKS .
- Lash Adjuster (Tappet) Noise Diagnosis: Refer to HYDRAULIC LASH ADJUSTER NOISE DIAGNOSIS .
- Engine Oil Leak Inspection: Refer to ENGINE OIL LEAK INSPECTION .