LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Manifolds >> Manifold-Intake >> Diagnosis And Testing >> Manifold-Intake Leaks

Manifold-Intake Leaks

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

An intake manifold air leak is characterized by lower than normal manifold vacuum. Also, one or more cylinders may not be functioning.

WARNING: Use extreme caution when the engine is operating. Do not stand in a direct line with the fan. Do not put your hands near the pulleys, belts or the fan. Do not wear loose clothing.
  1. Start the engine.
  2. Spray a small stream of water (Spray Bottle) at the suspected leak area.
  3. If engine RPM'S change, the area of the suspected leak has been found.
  4. Repair as required.
scientia non olet · About LEMON Manuals