LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine & Automatic Transmission Cooling System) >> Engine >> Heater Supply Tube >> Removal >> 5.7L/6.1L Engine

5.7L/6.1L Engine

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heater Supply Hose
GC0015491Courtesy of DAIMLERCHRYSLER CORP.
1 - Heater Hose
2 - Clamp
3 - Tube
  1. Disconnect negative battery cable.
  2. Drain cooling system (Refer to COOLING - STANDARD PROCEDURE) .
  3. Remove intake manifold (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) and REMOVAL .
  4. Remove heater hoses from heater tubes.
  5. Remove heater tube mounting bolts.
  6. Remove heater tubes from water pump housing and remove from vehicle.
scientia non olet · About LEMON Manuals