LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body - Interior & Exterior) >> Instrument Panel >> Latch-Glove Box >> Installation

Latch-Glove Box: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Latch-Glove Box R and I
GC0013485Courtesy of DAIMLERCHRYSLER CORP.
  1. If removed, install the glove box lock cylinder into the latch (Refer to BODY/INSTRUMENT PANEL/LOCK CYLINDER-GLOVE BOX - INSTALLATION) .
  2. Install the latch assembly (3) into the glove box door (1).
  3. Install the two screws (2) that secure the latch assembly to the glove box door. Tighten the screws securely.
  4. Close the glove box bin.
scientia non olet · About LEMON Manuals