LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Power Top - Convertible (Service Information)) >> Switch-Power Top >> Installation

Switch-Power Top: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Power Top Switch
GC0043681Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the accessory switch bezel (2) onto the back of the instrument panel center bezel (3).
  2. Install the two screws (1) that secure the accessory switch bezel to center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Install the center bezel onto the instrument panel (Refer to BODY/INSTRUMENT PANEL/BEZEL-CENTER - INSTALLATION) .
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals