Service Information: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clock Illumination Lamps

Courtesy of DAIMLERCHRYSLER CORP.

Place lamp and sockets (1) into opening and turn clockwise till detent is felt.
Place the clock into bezel opening and then install the two retaining screws (1).

Fig 2: Clock Retaining Screws
Courtesy of DAIMLERCHRYSLER CORP.
Install the Instrument Panel Center Bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .

Fig 3: Bezel IP Center
Courtesy of DAIMLERCHRYSLER CORP.
Connect the battery negative cable.
Adjust clock to proper time.