Body - Interior & Exterior: Seats: Support-Lumbar: Removal

Fig 1: Lumbar Screen 1

Courtesy of CHRYSLER LLC

1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
2. Remove the seat back cushion/cover. See REMOVAL .
3. Release the lumbar mat side wires (1) by pulling out on the wire supports and then pulling them in.
   Fig 2: Lumbar Screen 2

   Courtesy of CHRYSLER LLC
4. Squeeze the lower support wires (1) in and release the lower wires.
   Fig 3: Lumbar Screen 3

   Courtesy of CHRYSLER LLC
5. Pull the upper support wires (1) down and release the lumbar mat from the seat back frame.
   Fig 4: Lumbar Actuator

   Courtesy of CHRYSLER LLC
6. Remove the rivet (1) and remove the lumbar mechanism (2).