Cushion/Cover-Seat Back - Front: Removal

Fig 1: Handles & Shields

Courtesy of CHRYSLER LLC

1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
2. Remove the front seat. See REMOVAL .
3. Remove the lumbar and recliner handles (1).
4. Remove the screws and remove the side shields (2).
   Fig 2: Buckle

   Courtesy of CHRYSLER LLC
5. Remove the belt buckle.
   Fig 3: Back Bolts

   Courtesy of CHRYSLER LLC
6. Remove the seat back bolts from both sides.
   Fig 4: Head Rest

   Courtesy of CHRYSLER LLC
7. Push in the buttons on both headrest sleeves, pull the headrest up and remove.
   Fig 5: Zip Strip

   Courtesy of CHRYSLER LLC
8. Separate the j-straps (1 & 2) and pull cover up over frame and remove cushion.
9. Pinch both headrest sleeve ribs from inside the seat back frame with pliers or equivalent.
10. Strike the bottom of the sleeve with a rubber mallet or equivalent, and remove the headrest sleeves.