Right Instrument Panel Trim Bezel: Removal

1. Remove instrument panel center bezel. (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - REMOVAL) 
2. Remove the one retaining screw located on the right side of the center stack, behind the center bezel. See Fig 1.
3. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the right instrument panel trim bezel and remove.

Fig 1: Right Instrument Panel Trim Bezel

Courtesy of DAIMLERCHRYSLER CORP.

1 - CLIP

2 - RIGHT INSTRUMENT PANEL TRIM PANEL

3 - SCREW