LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior >> Instrument Panel >> Instrument Panel Center Bezel >> Removal

Instrument Panel Center Bezel: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the edge of the instrument panel center bezel and pull outward. See Fig 1.
  3. Disconnect the wire connector to the HVAC control.
  4. Remove the instrument panel center bezel from the vehicle.
Fig 1: Instrument Panel Center Bezel
GC0031445Courtesy of DAIMLERCHRYSLER CORP.
1 - CENTER BEZEL
2 - INSTRUMENT PANEL
scientia non olet · About LEMON Manuals