LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Restraints >> Seat Belts >> Restraints System (Service Information) >> Rear Seat Belt & Retractor >> Removal

Rear Seat Belt & Retractor: Removal

  1. Remove turning loop cover.
  2. Remove turning loop bolt.
  3. Remove upper and lower trim bezels.
  4. Remove trim panel from body (Refer to BODY/INTERIOR/LEFT QUARTER TRIM PANEL - REMOVAL) .
  5. Remove lower seat belt anchor bolt.
  6. Feed seat belt and hardware through trim openings.
  7. Unbolt and remove the retractor and belt assembly.
scientia non olet · About LEMON Manuals