HVAC Systems (Service Information): Distribution: Duct-Defroster: Installation

Fig 1: Removing/Installing Duct - Defroster

Courtesy of DAIMLERCHRYSLER CORP.

1. Position the defroster duct (4) to the back of the instrument panel.
2. Install the four screws (2) that secure the defroster duct to the instrument panel. Tighten the screws to 2 N.m (17 in. lbs.).
3. Connect the right demister duct (1) and the left demister duct (3) to the defroster duct.
4. Install the instrument panel assembly (Refer to BODY/INSTRUMENT PANEL/ASSEMBLY-INSTRUMENT PANEL - INSTALLATION) .