Seal-Oil Crankshaft Front: Installation

Fig 1: Crankshaft Front Oil Seal - Installation

Courtesy of DAIMLERCHRYSLER CORP.

1 - SEAL PROTECTOR 6780 - 2

2 - SEAL

3 - FRONT CRANKSHAFT SEAL INSTALLER 6780 - 1

1. Install new seal by using Front Crankshaft Seal Installer 6780 (3). See Fig 1.
2. Place seal (2) into opening with seal spring towards the inside of engine. Install seal until flush with cover.
   Fig 2: Crankshaft Sprocket - Installation

   Courtesy of DAIMLERCHRYSLER CORP.

   1 - CRANKSHAFT DAMPER/SPROCKET INSTALLER 6792

   2 - TIGHTEN NUT TO INSTALL

3. Install crankshaft sprocket using Crankshaft Damper/Sprocket Installer 6792 (1). See Fig 2.
4. Install timing belt (Refer to ENGINE/VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS - INSTALLATION)  .
5. Install crankshaft vibration damper (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - INSTALLATION)  .