Removal - Convertible
| 1 - SEAT BACK RELEASE |
| 2 - TRUNK SIDE TRIM PANEL(S) |
| 3 - DECKLID SILL SCUFF PLATE |
- Remove decklid sill scuff plate (3). (Refer to BODY/INTERIOR/DECKLID SILL SCUFF PLATE - REMOVAL) .
- Disconnect power outlet/cargo lamp, if equipped.
1 - PUSH PIN FASTENER 2 - TRUNK TRIM PANEL 3 - PLASTIC NUT - Remove push pin fastener (1) attaching trunk side trim panel (2).
- Pull inward on trunk side trim panel (2) to disengage clips.
- Remove trunk side trim panel (2) from vehicle. Repeat operation for other side.