LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior (2 Of 2) >> Interior >> Header Latch Retainer - Convertible >> Removal >> Removal - Convertible

Removal - Convertible

Fig 1: Partial Up Position
GC0022260Courtesy of DAIMLERCHRYSLER CORP.
  1. Place convertible top in the partial up position.
  2. Remove header end molding as necessary. (Refer to REMOVAL - CONVERTIBLE ).
    Fig 2: Header Latch Retainer
    GC0022412Courtesy of DAIMLERCHRYSLER CORP.
    1 - WINDSHIELD SURROUND FRAME
    2 - ATTACHING SCREWS
    3 - HEADER LATCH RETAINER
  3. Remove two screws attaching header latch retainer (3) to windshield surround frame (1).
  4. Remove header latch retainer (3) from vehicle.
scientia non olet · About LEMON Manuals