LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Clock (Service Information) >> Service Information >> Installation

Service Information: Installation

Fig 1: Clock Illumination Lamps
GC0015722Courtesy of DAIMLERCHRYSLER CORP.
  1. Place lamp and sockets (1) into opening and turn clockwise till detent is felt.
  2. Place the clock into bezel opening and then install the two retaining screws (1).
    Fig 2: Clock Retaining Screws
    GC0015723Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the Instrument Panel Center Bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
    Fig 3: Bezel IP Center
    GC0043059Courtesy of DAIMLERCHRYSLER CORP.
  4. Connect the battery negative cable.
  5. Adjust clock to proper time.
scientia non olet · About LEMON Manuals