LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Top - Convertible (Service Information) >> Switch-Power Top >> Installation

Switch-Power Top: Installation

Fig 1: View Of Power Top Switch
GC0043681Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the accessory switch bezel (2) onto the back of the instrument panel center bezel (3).
  2. Install the two screws (1) that secure the accessory switch bezel to center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Install the center bezel onto the instrument panel (Refer to BODY/INSTRUMENT PANEL/BEZEL-CENTER - INSTALLATION) .
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals