LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Theft Security System (Service Information) >> Siren - Export >> Removal

Siren - Export: Removal

Fig 1: Removing/ Installing Vehicle Theft Security Siren
GC0041446Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the left front wheel well splash shield (Refer to BODY/EXTERIOR/FRONT END SPLASH SHIELDS - REMOVAL) .
  3. Remove the air blocker to see siren (1).
  4. Disconnect the siren electrical connector.
  5. Remove the siren retaining screws (2) and remove the siren (1) from the vehicle.
scientia non olet · About LEMON Manuals