Instrument Panel Top Cover: Removal
- Remove A-pillar trim. (Refer to BODY/INTERIOR/A-PILLAR TRIM - REMOVAL) .
- Using a trim stick C-4755 or equivalent, disengage the locking tabs attaching rear of vehicle edge of top cover to instrument panel. See Fig 1.NOTE: The Instrument Panel Top Cover may be hard to unsnap from the instrument panel. Use care not to mar, scuff, or damage the instrument panel pad.
- Pull top cover upward to disengage mounting clips attaching front of top cover.
- Remove top cover from vehicle by pulling rearward to disengage forward clips.
| 1 - INSTRUMENT PANEL TOP COVER |
| 2 - AREA TO CHECK FIT AND FINISH |
| 3 - LOCKING TABS |
| 4 - LOCATING PIN(S) |