Body - Interior & Exterior: Exterior: Grille: Removal

1. Remove radiator closure (Refer to BODY/EXTERIOR/CLOSURE PANEL - REMOVAL) .
2. Remove front fascia. See Fig 1 and (Refer to FRAME & BUMPERS/FRONT FASCIA - REMOVAL) .
3. Remove grille from front fascia. See Fig 2. Using care and depress push pin(s) fasteners to release the grille.
4. Remove bright chrome molding from Grille. See Fig 3.
5. Depress molding locking tabs and pull outward to release molding.

Fig 1: UPPER FRONT FASCIA

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT UPPER FASCIA

2 - GRILLE

3 - BRIGHT CHROME MOLDING

4 - FRONT LOWER FASCIA

Fig 2: UPPER FASCIA AND GRILLE

Courtesy of DAIMLERCHRYSLER CORP.

1 - GRILLE

2 - PUSH PIN(S) FASTENER(S)

3 - FRONT UPPER FASCIA

Fig 3: BRIGHT CHROME MOLDING

Courtesy of DAIMLERCHRYSLER CORP.

1 - GRILLE

2 - BRIGHT CHROME MOLDING