LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frames & Bumpers >> Front Bumper Reinforcement >> Installation

Front Bumper Reinforcement: Installation

  1. Place bumper reinforcement in position. See Figure.
  2. Install bolts attaching reinforcement to rail assembly.
  3. Install front fascia (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION) .
  4. Install grille (Refer to BODY/EXTERIOR/GRILLE - INSTALLATION) .
scientia non olet · About LEMON Manuals