LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Exterior >> Luggage Rack Side Rail >> Removal

Luggage Rack Side Rail: Removal

  1. Remove the crossbars. (Refer to BODY/EXTERIOR/LUGGAGE RACK CROSSBAR - REMOVAL) 
  2. Disconnect and isolate the battery negative cable.
    NOTE: Remove the following trim panels from the same side as the side rail only.
  3. Remove the a-pillar trim. (Refer to BODY/INTERIOR/A-PILLAR TRIM - REMOVAL) 
  4. Remove the sunvisor and holder. (Refer to BODY/INTERIOR/SUN VISOR - REMOVAL) 
  5. Partially remove the sunroof trim lace. (Refer to BODY/SUNROOF/OPENING TRIM LACE - REMOVAL) 
  6. Remove the upper b-pillar trim. (Refer to BODY/INTERIOR/B-PILLAR TRIM - REMOVAL) 
  7. Remove the front and rear assist handles.
  8. Remove the upper c-pillar trim. (Refer to BODY/INTERIOR/C-PILLAR TRIM - REMOVAL) 
  9. Remove the upper d-pillar trim. (Refer to BODY/INTERIOR/D-PILLAR TRIM - REMOVAL) 
  10. Remove push pin fastener at the rear of the head liner.
  11. Lower headliner to gain access to the side rail nuts.
  12. Remove the five side rail nuts and remove the side rail.
scientia non olet · About LEMON Manuals