LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior (Service Information) >> Stationary Glass >> Windshield >> Removal

Stationary Glass: Windshield: Removal

Fig 1: Identifying Windshield Moldings
GC0033361Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove inside rear view mirror. (Refer to ELECTRICAL/POWER MIRRORS/AUTOMATIC DAY / NIGHT MIRROR - REMOVAL) .
  2. Remove cowl cover. (Refer to BODY/EXTERIOR/COWL GRILLE - REMOVAL) .
  3. Remove upper windshield molding (2).
  4. Remove windshield side moldings (1).
    Fig 2: Removing Windshield
    GC0033362Courtesy of DAIMLERCHRYSLER CORP.
    WARNING: WEAR EYE AND HAND PROTECTION WHEN HANDLING GLASS. PERSONAL INJURY CAN RESULT.
    CAUTION: Do not damage body or trim finish when cutting out glass or applying fence primer.
  5. Cut urethane bonding from around windshield (2) using a suitable sharp cold knife (1). A pneumatic cutting device can be used if available.
  6. Separate windshield (2) from vehicle.
scientia non olet · About LEMON Manuals