Transmission Range Sensor: Removal
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Remove valve body assembly from transaxle. (Refer to TRANSMISSION/TRANSAXLE/AUTOMATIC - 41TE/VALVE BODY - REMOVAL)
- Remove transmission range sensor retaining screw and remove sensor from valve body. See Fig 1.
1 - TRANSMISSION RANGE SENSOR 2 - MANUAL VALVE CONTROL PIN 3 - RETAINING SCREW - Remove TRS from manual shaft.