LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Instrument Cluster - Except Coupe) >> Vacuum Fluorescent Display >> Removal

Vacuum Fluorescent Display: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
  2. Remove instrument cluster from vehicle. Refer to REMOVAL .
  3. Remove six cluster back cover retaining screws and remove the cover.
  4. Carefully unplug the connector from printed circuit board.
  5. Remove six attachment screws and then remove cluster mask/lens from the instrument cluster.
  6. Carefully pull the dial assembly from the housing to separate connection with the PC-board.
  7. Remove two screws from the back of the dial assembly to remove the VF-display.
  8. Remove the VF-display from the cluster.
scientia non olet · About LEMON Manuals