Right Lower Instrument Panel Trim: Removal
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative remote cable.
- Remove one screw to shift knob and transmission range indicator bezel from floor console.
- Remove floor console (Refer to BODY/INTERIOR/FLOOR CONSOLE - REMOVAL) .
- Remove instrument panel kick shield (Refer to BODY/INSTRUMENT PANEL/KNEE BLOCKER - REMOVAL) .
- Remove right and left instrument panel end cover (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL END CAP - REMOVAL) .
- Remove left lower instrument panel trim (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - REMOVAL) .
- Remove instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - REMOVAL) .
- Remove instrument panel inboard bezel and outboard bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - REMOVAL) (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - REMOVAL) .
- Remove right instrument panel trim bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - REMOVAL) .
- Remove instrument panel cluster bezel (Refer to BODY/INSTRUMENT PANEL/CLUSTER BEZEL - REMOVAL) .
- Remove CD changer Trim Bezel, CD player, and CD support bracket (if equipped) (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - REMOVAL) .
- Remove radio.
- Unsnap right a/c barrel and remove a/c housing.
- Remove glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - REMOVAL) .
- Remove 13 screws and remove panel.
- Remove cubby bin mat (if equipped).