Right Instrument Panel Trim Bezel: Removal
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Remove instrument panel center bezel. (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - REMOVAL)
- Remove the one retaining screw located on the right side of the center stack, behind the center bezel. See Fig 1.
- Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the right instrument panel trim bezel and remove.
| 1 - CLIP |
| 2 - RIGHT INSTRUMENT PANEL TRIM PANEL |
| 3 - SCREW |