Instrument Panel Inboard Bezel: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Remove instrument panel center bezel. Refer to REMOVAL .
Remove the one retaining screw located on the left side of the center stack, behind the center bezel. See Fig 1.
Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the instrument panel inboard bezel and remove.

Fig 1: Instrument Panel Inboard Bezel

Courtesy of DAIMLERCHRYSLER CORP.

1 - INBOARD BEZEL

2 - CLIP

3 - SCREW