LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Instrument Panel >> Instrument Panel Inboard Bezel >> Installation

Instrument Panel Inboard Bezel: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the instrument panel inboard bezel over the retaining slots and firmly snap into place. See Figure.
  2. Install the one retaining screw located on the left side of the center stack, behind the center bezel.
  3. Install the instrument panel center bezel. Refer to INSTALLATION  .
scientia non olet · About LEMON Manuals