LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Hood >> Hinge >> Removal

Section 82 (Interior & Exterior - Except Coupe): Hood: Hinge: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support hood on the side that requires hinge replacement.
  2. Mark hinge attachment locations with a grease pencil or other suitable device to aid installation.
  3. Remove cowl cover (Refer to BODY/EXTERIOR/COWL GRILLE - REMOVAL) .
  4. Remove bolts attaching hood to hinge.
  5. Remove bolts attaching hood hinge to load beam inner and remove hinge from vehicle.
scientia non olet · About LEMON Manuals