Glass - Front/Rear Adjustment
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Remove quarter trim panel. (Refer to BODY/INTERIOR/QUARTER PANEL TRIM - REMOVAL)
- Remove center and rear side rail weatherstrips from side rail weatherstrip retainer channels.
- Loosen glass attachment bolts.
- Raise quarter glass and position correctly. See Figure.
- Tighten all fasteners.
- Install center and rear side rail weatherstrips to side rail weatherstrip retainer channels.
- Cycle quarter glass between full up and full down positions. Verify operation and adjust as necessary.
- Install quarter trim panel. (Refer to BODY/INTERIOR/QUARTER PANEL TRIM - INSTALLATION)