LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (HVAC Systems - Except Coupe) >> Distribution >> Instrument Panel Ducts >> Installation

Instrument Panel Ducts: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the panel and demister duct assembly into the instrument panel.
  2. Install the screws that secure the panel and demister duct assembly to the instrument panel support. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Install the center instrument panel duct into the instrument panel.
  4. Install the center distribution duct into the instrument panel and connect it to the panel and demister duct assembly.
  5. Install the screws that secure the center distribution duct to the instrument panel support. Tighten the screws to 2 N.m (17 in. lbs.).
  6. Install the passenger side air bag into the instrument panel (Refer to ELECTRICAL/RESTRAINTS/PASSENGER AIRBAG - INSTALLATION) .
  7. Install the instrument cluster into the instrument panel (Refer to ELECTRICAL/INSTRUMENT CLUSTER - INSTALLATION) .
  8. If equipped , install the sun sensor onto the instrument panel (Refer to HEATING & AIR CONDITIONING/CONTROLS/SUN SENSOR - INSTALLATION) .
  9. Install the speakers into the instrument panel (Refer to ELECTRICAL/AUDIO/SPEAKER - INSTALLATION) .
  10. Install the defroster duct onto the instrument panel (Refer to HEATING & AIR CONDITIONING/DISTRIBUTION/DEFROSTER DUCTS - INSTALLATION) .
  11. Install the instrument panel top cover onto the instrument panel. (Refer to INSTALLATION ).
  12. Install the HVAC housing onto the instrument panel and install the instrument panel and HVAC housing into the vehicle as an assembly (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - INSTALLATION) .
scientia non olet · About LEMON Manuals