A/C Heater Control: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Position the A/C-heater control into the instrument panel center bezel.
- Install the six screws that secure the A/C-heater control to the center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
- Install the instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
- Reconnect the battery negative cable.