LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Crankshaft Oil Seal - Front >> Removal

Crankshaft Oil Seal - Front: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove crankshaft vibration damper. (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - REMOVAL) 
  2. Install Special Tool 8194, Insert into crankshaft nose. Remove seal using Special Tool 6771, Remover. See Fig 1.
Fig 1: Crankshaft Front Oil Seal - Removal
GC0015326Courtesy of DAIMLERCHRYSLER CORP.
1 - SPECIAL TOOL 6771
scientia non olet · About LEMON Manuals