Crankshaft Oil Seal - Front: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Install new seal using Special Tools 6780-2 Sleeve, 6780-1 Installer, and 8179 Stud. See Fig 1.
- Install crankshaft vibration damper. (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - INSTALLATION)
| 1 - SPECIAL TOOL 6780-2 |
| 2 - SPECIAL TOOL 8179 |
| 3 - SPECIAL TOOL 6780-1 |
| 4 - SEAL |