Rear Cover
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Remove front timing belt cover.CAUTION: Camshaft(s) or crankshaft should not be rotated after timing belt is removed. Damage to valve components may occur. Always align timing marks before removing timing belt.
- Remove timing belt (Refer to ENGINE/VALVE TIMING/TIMING BELT AND SPROCKETS - REMOVAL) .
- Remove timing belt tensioner assembly (Refer to ENGINE/VALVE TIMING/TIMING BELT TENSIONER & PULLEY - REMOVAL) .
- Remove timing belt idler pulley.
- Hold camshaft sprockets with Special Tools C-4687 and Adaptor C-4687-1, while removing attaching bolts. See Fig 1.
- Remove camshaft sprockets.
- Remove rear timing belt cover attaching bolts.
- Remove rear cover.
| 1 - ADAPTER C-4687-1 |
| 2 - SPECIAL TOOL C-4687 |