LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (2.0L DOHC Engine (Service Information) - Except Coupe) >> Hydraulic Lash Adjusters >> Installation

Hydraulic Lash Adjusters: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install hydraulic lifter. See Figure. Ensure the lifters are at least partially full of engine oil. This is indicated by little or no plunger travel when the lifter is depressed.
  2. Install rocker arm (Refer to ENGINE/CYLINDER HEAD/ROCKER ARMS - INSTALLATION) .
  3. Repeat installation procedure for each hydraulic lifter.
  4. Install cylinder head cover (Refer to ENGINE/CYLINDER HEAD/CYLINDER HEAD COVER(S)  - INSTALLATION).
scientia non olet · About LEMON Manuals