Special Tools
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION
| TOOL | TOOL NUMBER AND NAME | REPLACED BY MILLER TOOL NUMBER | APPLICATION |
|---|---|---|---|
| MB991897 Ball joint remover | MB991113 | Tie rod end disconnection
NOTE:
Steering linkage puller (MB990635 or MB991113)is also used to disconnect knuckle and tie rod end ball joint.
|
|
| MB990326 Preload socket | N/A | Tie rod end ball joint breakaway torque check | |
| MB991548 Power steering oil pressure gauge adapter (Pump side) | 8598 | Oil pump pressure test | |
| MB991549 Power steering oil pressure gauge adapter (Hose side) | 8354 | ||
| MB990662 Oil pressure gauge assembly | 6815 6959 | ||
| MB990803 Steering wheel puller | L-4407A | Steering wheel removal | |
| MB991006 Preload socket | CT-1108 | Gear box total pinion torque check | |
| MB991204 Torque wrench socket | N/A |
|
|
| MB990925 Bearing and oil seal installer set | N/A |
|
|
| MB991120 Needle bearing puller | N/A | Needle roller bearing removal | |
| MB991199 Oil seal installer | N/A | Oil seal installation | |
| MB991197 Bar (long type) | N/A | ||
| MB991202 Oil seal and bearing installer | N/A | Needle roller bearing installation | |
| MB991213 Rack installer | N/A | Rack installation | |
| MB991203 Oil seal and bearing installer | N/A | Oil seal and bearing installation | |
| MB991317 Seal ring installer | MB991317 | Seal ring installation | |
| MB991152 Dust cover installer | N/A | Oil seal installation | |
| MB991561 Boot band crimping tool | C-4975A | Bellows band installation | |
| MB990776 Front axle base | MB990776A | Dust cover installation |