LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Inspection >> Tie Rod End Ball Joint Dust Cover Check

Tie Rod End Ball Joint Dust Cover Check

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the dust cover for cracks or damage by pushing it with your finger.
  2. If the dust cover is cracked or damaged, replace the tie rod end (Refer to TIE ROD END BALL JOINT DUST COVER CHECK  ).
    NOTE: Cracks or damage of the dust cover may damage the ball joint. If it is damaged during service work, replace the dust cover (Refer to TIE ROD END BALL JOINT DUST COVER REPLACEMENT  ).