Tie Rod End Ball Joint Dust Cover Replacement
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
If the dust cover is damaged accidentally during service work, replace the dust cover as follows:
- Apply MOPAR(R) Multi-mileage Lubricant Part No. 2525035 or equivalent to the lip and inside of the dust cover.
- Drive in the dust cover with special tool MB990776 until it is fully seated.
- Check the dust cover for cracks or damage by pushing it with your finger.