Fuel Level Sensor Resistance
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Check that resistance value between the fuel gauge terminal and ground terminal is at the standard value when the fuel level sensor float is between point.
Standard value:
- Point "F": 3 - 5 Ω
- Point "E": 110 - 112 Ω
- Check that resistance value changes smoothly when the float moves slowly between point.
- If no problems are found in steps above, go to "FUEL LEVEL SENSOR FLOAT HEIGHT " check. If any problem is found, replace the fuel level sensor.